Carbon Nano Fibre Reinforcements In Concrete
Keywords:
Carbon Nano Fibre, Reinforcements In Concrete, Nanomaterials, Cementitious matricesAbstract
Graphite nanomaterials offer distinct advantages over micro scale reinforcing fibers in terms of engineering properties and geometric attributes. Through dispersion and effective interfacial interactions of proper functionalization of carbon nanofibers are the prerequisites for their effective use in high-performance cementitious matrices. Furthermore, the use of nano- and micro-scale reinforcements together provides reinforcing effects at different scales, thus rendering balanced gains in engineering properties of the matrix. However, their uses in coarser high-performance matrices have not been evaluated thoroughly. The results show improvements in all flexural attributes, impact and abrasion resistance of concrete with addition of 0.16% of oxidized and polyacrylic acid physisorbed carbon nanofibers, over the corresponding properties of plain matrix. The results also pointed to synergetic effects of hybrid reinforcements on improving the various engineering properties of DSP concrete matrix, especially with low modulus polypropylene microfibers.
Downloads
References
Aı̈tcin, P. C. (2000). Cements of yesterday and today: concrete of tomorrow. Cement and Concrete research, 30(9), 1349-1359.
Alkhateb, H., Al-Ostaz, A., Cheng, A. H. D., and Li, X. (2013). Materials genome for graphene-cement nanocomposites. Journal of Nanomechanics and Micromechanics, 3(3), 67-77.
Asmara, Y. P., Kurniawan, T., Sutjipto, A. G. E., and Jafar, J. (2018). Application of Plants Extracts as Green Corrosion Inhibitors for Steel in Concrete-A review. Indonesian Journal of Science and Technology, 3(2), 158-170.
Awan, M. M. S., Soroushian, P., Ali, A., and Awan, M. Y. S. (2017). Use of Carbon Nano-Fibers in Cementitious Mortar. Indonesian Journal of Science and Technology, 2(2), 134-151.
Awan, M. M. S., Soroushian, P., Ali, A., and Awan, M. Y. S. (2017). High-Performance Cementitious Matrix using Carbon Nanofibers. Indonesian Journal of Science and Technology, 2(1), 57-75.
Badanoiu, A., Georgescu, M., and Puri, A. (2003). The study of'DSP'binding systems by thermogravimetry and differential thermal analysis. Journal of Thermal Analysis and Calorimetry, 74(1), 65-75.
Banthia, N., and Sappakittipakorn, M. (2007). Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cement and Concrete Research, 37(9), 1366-1372.
Bayard, O., and Plé, O. (2003). Fracture mechanics of reactive powder concrete: material modelling and experimental investigations. Engineering Fracture Mechanics, 70(7-8), 839-851.
Bonneau, O., Poulin, C., Dugat, M., and Tcin, P. C. A. (1996). Reactive powder concretes: from theory to practice. Concrete International, 18(4), 47-49.
Bonneau, O., Vernet, C., Moranville, M., and Aı̈tcin, P. C. (2000). Characterization of the granular packing and percolation threshold of reactive powder concrete. Cement and Concrete Research, 30(12), 1861-1867.
Chan, Y. W., and Chu, S. H. (2004). Effect of silica fume on steel fiber bond characteristics in reactive powder concrete. Cement and Concrete Research, 34(7), 1167-1172. C
heyrezy, M., Maret, V., and Frouin, L. (1995). Microstructural analysis of RPC (reactive powder concrete). Cement and Concrete Research, 25(7), 1491-1500.
Collepardi M., Corinaldesi V., Monosi S., and Moriconi G., (2002). Applicazioni e sviluppo dei materiali DSP; DSP materials applications and development progress, Industria Italiana del Cemento, (72) 540-545.
Cwirzen, A., Habermehl-Cwirzen, K., and Penttala, V. (2008). Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites. Advances in Cement Research, 20(2), 65-73.
Cwirzen, A., Habermehl-Cwirzen, K., Nasibulin, A. G., Kaupinen, E. I., Mudimela, P. R., and Penttala, V. (2009). SEM/AFM studies of cementitious binder modified by MWCNT and nano-sized Fe needles. Materials Characterization, 60(7), 735-740.
Dattatreya, J. K., Harish, K. V., and Neelamegam, M. (2007). Use of particle packing for mix proportioning of reactive powder concrete. Indian Concrete Journal, 81(9), 31.
Dili, A. S., and Santhanam, M. (2004). Investigations on reactive powder concrete: A developing ultra-high-strength technology. Indian Concrete Journal, 78(4), 33-38.
Feylessoufi, A., Villieras, F., Michot, L. J., De Donato, P., Cases, J. M., and Richard, P. (1996). Water environment and nanostructural network in a reactive powder concrete. Cement and Concrete Composites, 18(1), 23-29.
Guerrini, G. L. (2000). Applications of high-performance fiber-reinforced cement-based composites. Applied Composite Materials, 7(2-3), 195-207.
Ju, Y., Jia, Y., Liu, H., and Chen, J. (2007). Mesomechanism of steel fiber reinforcement and toughening of reactive powder concrete. Science in China Series E: Technological Sciences, 50(6), 815-832.
Kaufmann J., Hesselbarth D., (2002) Cementitious high-performance composites, EMPA (Swiss Federal Laboratories for Materials Testing and Research) Publication, 32-33.
Lawler, J. S., Zampini, D., and Shah, S. P. (2005). Microfiber and macrofiber hybrid fiber-reinforced concrete. Journal of Materials in Civil Engineering, 17(5), 595-604.
Lee, M. G., Wang, Y. C., and Chiu, C. T. (2007). A preliminary study of reactive powder concrete as a new repair material. Construction and Building Materials, 21(1), 182-189.
Li, G. Y., Wang, P. M., and Zhao, X. (2005). Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes. Carbon, 43(6), 1239-1245.
Makar, J. M., and Beaudoin, J. J. (2004). Carbon nanotubes and their application in the construction industry. Special Publication-Royal Society of Chemistry, 292, 331-342.
Makar, J. M., and Chan, G. W. (2009). Growth of cement hydration products on single‐walled carbon nanotubes. Journal of the American Ceramic Society, 92(6), 1303-1310.
Matte, V., and Moranville, M. (1999). Durability of reactive powder composites: influence of silica fume on the leaching properties of very low water/binder pastes. Cement and Concrete Composites, 21(1), 1-9.
Metaxa, Z. S., Konsta-Gdoutos, M. S., and Shah, S. P. (2009). Carbon nanotubes reinforced concrete. Special Publication, 267, 11-20.
Metaxa, Z. S., Konsta-Gdoutos, M. S., and Shah, S. P. (2010). Mechanical properties and nanostructure of cement-based materials reinforced with carbon nanofibers and polyvinyl alcohol (PVA) microfibers. Special Publication, 270, 115-124.
Moranville-Regourd, M. (2002). New cementitious systems and composite materials. Key Engineering Ceramics, 206, 1841-1846.
O'Connell, M. J., Boul, P., Ericson, L. M., Huffman, C., Wang, Y., Haroz, E., and Smalley, R. E. (2001). Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping. Chemical Physics Letters, 342(3-4), 265-271.
Peyvandi, A., Sbia, L. A., Soroushian, P., and Sobolev, K. (2013). Effect of the cementitious paste density on the performance efficiency of carbon nanofiber in concrete nanocomposite. Construction and Building Materials, 48, 265-269.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Universitas Pendidikan Indonesia
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
