The Journal of Engineering, Science and Technology (JESTEC): A Bibliometric Insight into Materials Research Trends and Innovation to Support Sustainable Development Goals (SDGs)
Keywords:
Bibliometric analysis, Materials innovation, Materials engineering, Scopus-indexed publications, Sustainable development goals (SDGs)Abstract
This study presents a bibliometric analysis of materialsrelated research published in the Journal of Engineering
Science and Technology (JESTEC) from its inception until
2025. The analysis covers publications indexed in Scopus
from 2009 to July 2025, totaling 3,825 documents, of which
a substantial subset is dedicated to materials science and
engineering. Data were retrieved using JESTEC ISSN in the
Scopus database and filtered using keywords such as
“material”, in which this is appropriate to include term of
materials engineering, composite, and nanomaterial.
Findings reveal that materials science has become a
significant research domain in JESTEC, with topics ranging
from adsorption and composite fabrication to renewable
materials and nanotechnology applications. The analysis also
shows a growing alignment of research with the Sustainable
Development Goals (SDGs), particularly in sustainable
production, environmental protection, and energy
efficiency. These results highlight JESTEC’s role as a platform
for advancing interdisciplinary materials research and its
contributions toward global sustainability targets.
References
Afifah, S., Mudzakir, A., and Nandiyanto, A. B. D. (2023). Empirical demonstration of fireretardant bamboo to junior high school students for improving understanding of
physicochemical properties of organic material. Journal of Engineering Science and
Technology, 18(1), 136–146.
Al Husaeni, D. F., Al Husaeni, D. N., Nandiyanto, A. B. D., Rokhman, M., Chalim, S., Chano, J.,
Al-Obaidi, A.S.M. and Roestamy, M. (2024). How technology can change educational
research? Definition, factors for improving quality of education and computational
bibliometric analysis. ASEAN Journal of Science and Engineering, 4(2), 127-166.
Al Huseeni, D. F., and Nandiyanto, A. B. D. (2022). Bibliometric computational mapping
analysis of publications on mechanical engineering education using VOSviewer. Journal
of Engineering Science and Technology, 17(2), 1135–1149.
Al-Obaidi, A. S. M. (2025). Journal of Engineering, Science and Technology at the Crossroads
of Science and Education: A Bibliometric Review (2009–2025). ASEAN Journal of
Educational Research and Technology, 4(3), 267-294.
Al-Obaidi, A. S. M., Al Husaeni, D. F., Setiyo, M., and Nandiyanto, A. B. D. (2024). The role of
mechanical engineering in industry: Review and bibliometric analysis. Mechanical
Engineering for Society and Industry, 4(3), 308-317.
Artina, E., Suryadi, K., Masyitoh, I. S., Syaflullah, S., and Amin, M. (2025). Web-based
application design on the effect of digitalization on polarization and social integration.
Journal of Engineering Science and Technology, 20(3), 57–64.
Belhadi, M.A., Kadja, M., Mechighel, F., Khechekhouche, A., and Hamaiti, Y. (2025). Enhanced
thermal performance of parabolic through collectors with TiO₂ nanofluids in an arid
climate. Indonesian Journal of Science and Technology, 10(1), 93-112.
Burleson, G., Lajoie, J., Mabey, C., Sours, P., Ventrella, J., Peiffer, E., and Aranda, I. (2023).
Advancing sustainable development: emerging factors and futures for the engineering
field. Sustainability, 15(10), 7869.
Eksasari, D., Wagino, W., Dwirisnanda, D. A., Abidin, Z., and Penehafo, A. E. (2025). The use
of assistive technology applications in improving the learning outcomes of students with
hearing disabilities. Journal of Engineering Science and Technology, 20(2), 31–38.
El Mrayej, H., En-Nabety, G., Ettahiri, W., Jghaoui, M., Sabbahi, R., Hammouti, B., Rais, Z. and
Taleb, M. (2025). Triazolopyrimidine derivatives: A comprehensive review of their
synthesis, reactivity, biological properties, and molecular docking studies. Indonesian
Journal of Science and Technology, 10(1), 41-74.
Farokhah, L., Herman, T., Wahyudin, W., Khasanah, L.A.I.U., Zulfadhli, M., Abidin, Z., Huda,
M.M., and Ariffiando, N.F. (2025). How to teach fraction for empowering student
mathematics literacy: Definition, bibliometric, and application using digital module.
ASEAN Journal of Science and Engineering, 5(1), 77-102.
Fiandini, M., Nandiyanto, A. B. D., and Muktiarni, M. (2024). Experimental demonstration for
teaching the concept of steam engine power plant to vocational students to support the
Sustainable Development Goals (SDGs) and its comparison to Indonesian Merdeka
Curriculum. Journal of Engineering Science and Technology, 19(5), 1878–1905.
Fufon, K., Notesiri, U., Lekchaum, K., Chomsuwan, K., Tanitteerapan, T., and Puengsungewan,
S. (2025). Smart electric resistance welding based on artificial intelligence (AI) based on
real-time adaptive statistical features completed with bibliometric analysis. ASEAN
Journal of Science and Engineering, 5(1), 173-198.
Gemil, K.W., Na’ila, D.S., Ardila, N.Z., and Sarahah, Z.U. (2024). The relationship of vocational
education skills in agribusiness processing agricultural products in achieving sustainable
development goals (SDGs). ASEAN Journal of Science and Engineering Education, 4(2),
-192.
Hadian, V. A., Suryadi, K., Darmawan, C., Danial, E., and Aulia, S. R. (2025). Web-based
platform as a technology to support political participation. Journal of Engineering Science
and Technology, 20(3), 161–168.
Harahap, H., Nasution, H., Manurung, R., Yustira, A., and Rashid, A.A. (2025). Development of
green polybag innovation products from biomass waste as planting media. Indonesian
Journal of Science and Technology, 10(1), 145-158.
Haruna, L.A., Purnama, L.A.M.J., Fristiohady, A., Masrinoul, P., Komaikul, J., Ketsuwan, K., and
Asasutjarit, R. (2025). Ganciclovir-loaded chitosan nanoparticles and their activity against
HSV-1 inducing herpetic retinitis. Indonesian Journal of Science and Technology, 10(1),
-190.
Henny, H., Budi, A.H.S., Andriyansyah, M., Ar Rozzak, M.R., Baru, M.M., and Masek, A. (2025).
Hazard identification, risk assessment, and determining control (HIRADC) for workplace
safety in manufacturing industry: A risk-control framework complete with bibliometric
literature review analysis to support sustainable development goals (SDGs). ASEAN
Journal for Science and Engineering in Materials, 4(2), 267-284.
Imaniyati, N., Ratnasari, C.D., and Adman, A. (2025). Enhancing job satisfaction through
human resource information systems and communication: A commitment-based
approach to achieve Sustainable Development Goals (SDGs) in education-oriented
organizations. ASEAN Journal of Educational Research and Technology, 4(2), 237-254.
Indra, S., Subagya, A., Dyarini, N., Nandiyanto, A.B.D. (2025). Techno-economic analysis of
solar panel production from recycled plastic waste as a sustainable energy source for
supporting digital learning in schools based on sustainable development goals (SDGs) and
science-technology integration. Journal of Engineering Science and Technology, 20(4),
–1158.
Kamanja, R., Wongrerkdee, S., Rungsawang, T., Wongrerkdee, S., Krobthong, S., Pimpang, P.,
Kaewtrakulchai, N. and Manatura, K. (2025). Activated carbon films from water hyacinth
waste for stable and sustainable counter-electrode application in dye-sensitized solar
cells. Indonesian Journal of Science and Technology, 10(1), 133-144.
Kochetkov, W.G., Novopolceva, O.M., Burmistrov, V.V., Pitushkin, D.A., Dyachenko, V.S.,
Bochkaryov, E.S., Kryukova, D.A., and Urzhumov, D.A. (2025). Synthesis and investigation
of dithiocarbamate derivatives as polyfunctional ingredients in rubber compounds.
Indonesian Journal of Science and Technology, 10(2), 237-248.
Kumar, P. S., and Kirthika, K. (2009). Equilibrium and kinetic study of adsorption of nickel from
aqueous solution onto bael tree leaf powder. Journal of Engineering Science and
Technology, 4(4), 351–363.
Luo, L., Zhang, J., Wang, H., Chen, M., Jiang, Q., Yang, W., and Guo, H. (2024). Innovations in
science, technology, engineering, and policy (iSTEP) for addressing environmental issues
towards sustainable development. The Innovation Geoscience, 2(3), 100087.
Makinde, S.O., Ajani, Y.A., and Abdulrahman, M.R. (2024). Smart learning as transformative
impact of technology: A paradigm for accomplishing sustainable development goals
(SDGs) in education. Indonesian Journal of Educational Research and Technology, 4(3),
-224.
Memon, F. A., Nuruddin, M. F., Khan, S., Shafiq, N., and Ayub, T. (2013). Effect of sodium
hydroxide concentration on fresh properties and compressive strength of selfcompacting geopolymer concrete. Journal of Engineering Science and Technology, 8(1),
–56.
Metteb, Z.W., Ogaili, A.A.F., Mohammed, K.A., Alsayah, A.M., Hamzah, M.N., Al-Sharify, Z.T.,
Jaber, A.A., and Njim, E.K. (2025). Optimization of hybrid core designs in 3D-printed PLA+
sandwich structures: An experimental, statistical, and computational investigation
completed with bibliometric analysis. Indonesian Journal of Science and Technology,
(2), 207-236.
Moallemi, E. A., Malekpour, S., Hadjikakou, M., Raven, R., Szetey, K., Ningrum, D., and Bryan,
B. A. (2020). Achieving the sustainable development goals requires transdisciplinary
innovation at the local scale. One Earth, 3(3), 300-313.
Mohammed, M.N., Abdullah, O.I., Jweeg, M.J., Aljibori, H.S.S., Abdullah, T.A., Alawi, N.M.,
Rasheed, R.T., Meharban, F., Hamzah, H.T., and Al-Obaidi, Q. (2025). Comprehensive
review on wastewater treatment using nanoparticles: Synthesis of iron oxide magnetic
nanoparticles, publication trends via bibliometric analysis, applications, enhanced
support strategies, and future perspectives. ASEAN Journal of Science and Engineering,
(1), 1-30.
Mohanraj, M., and Chandrasekar, P. (2009). Performance of a forced convection solar drier
integrated with gravel as heat storage material for chili drying. Journal of Engineering
Science and Technology, 4(3), 305–314.
Moizoro, S., Suryadi, D., Juandi, D., Dasari, D., and Muchlis, E. E. (2025). Integration of
GeoGebra and web: An innovative solution for guided discovery learning on triangle
congruence material to improve conceptual understanding for prospective mathematics
teacher students. Journal of Engineering Science and Technology, 20(3), 25–32.
Morin, S., Suryadi, D., Prabowanto, S., and Sulistiyo, D. (2025). Junior high school students in
solving mathematical ill-structured problems: Analyzing using Harel theory. Journal of
Engineering Science and Technology, 20(3), 1–8.
Mukhamedov, G.I., Usarov, J.E., Khimmataliev, D.O., Komilov, K.U., Axmadjonov, D.B.,
Qorayev, S.B., Gayupova, S.K., Rahimov, S.M., and Rajabov, F. (2025). Development of
interpolymer complexes for soil structure and water retention: A scientific and
technological contribution to Sustainable Development Goals (SDGs). ASEAN Journal of
Science and Engineering, 5(2), 315-326
Mukmin, M.N., Sukoharsono, E.G., Rusydi, M.K., Prihatiningtias, Y.W., Nandiyanto, A.B.D.
(2025). Techno-economic feasibility of educational board game production from agroindustrial waste in support of sustainable development goals (SDGs) through science and
technology integration. Journal of Engineering Science and Technology, 20(4), 1111–
Nandiyanto, A. B. D., Al Husaeni, D. F., and Al Husaeni, D. N. (2023b). Social impact and
internationalization of “Indonesian journal of science and technology” the best journal
in Indonesia: A bibliometric analysis. Journal of Advanced Research in Applied Sciences
and Engineering Technology, 32(2), 42-59.
Nandiyanto, A. B. D., Al Husaeni, D. F., Ragadhita, R., Maryanti, R., and Resa, F. N. (2022).
Curcumin inhibitor for iron corrosion isotherm adsorption using C++ program in
determining NaCl solution. Journal of Engineering Science and Technology, 17(6), 4117–
Nandiyanto, A. B. D., Al Husaeni, D. N., and Al Husaeni, D. F. (2023a). Introducing ASEAN
journal of science and engineering: A bibliometric analysis study. Journal of Advanced
Research in Applied Sciences and Engineering Technology, 31(3), 173-190.
Nandiyanto, A. B. D., Al Huseeni, D. N., and Al Huseeni, D. F. (2021). A bibliometric analysis of
chemical engineering research using VOSviewer and its correlation with Covid-19
pandemic condition. Journal of Engineering Science and Technology, 16(6), 4414–4422.
Nandiyanto, A. B. D., Piantara, E., Alvani, C., Fathurohman, D., and Ragadhita, R. (2024b).
Fabrication of resin-based brake pad from snake fruit peel as sustainable renewable
resources to support Sustainable Development Goals (SDGs). Journal of Engineering
Science and Technology, 19(5), 2022–2037.
Nandiyanto, A. B. D., Yarfah Alhaqqa, J., Fiandini, M., Ragadhita, R., and Kurniawan, T.
(2024a). Silica microparticles with various sizes from bamboo leave waste for ammonia
adsorption completed with bibliometric literature review, isotherm adsorption, and
proposal adsorption mechanism to support Sustainable Development Goals (SDGs).
Journal of Engineering Science and Technology, 19, 59–76.
Nandiyanto, A.B.D., Kurniawan, T., Bilad, M.R., and Farobie, O. (2025). Harnessing biomass
for sustainable development goals (SDGs): Definition, bibliometric, application,
opportunities, and challenges. Journal of Engineering Science and Technology, 20(4),
–1068.
Nur, L., Mushlih, H. Y., Hidayat, T., Wijaya, A., & Malik, A. A. (2025). Development and
validation of tactical games learning models based on digital technology. Journal of
Engineering Science and Technology, 20(3), 193–200.
Nurdin, E. S., Tanshzil, S. W., Nurbayani, S., Dahliyana, A., & Aulio, S. R. (2025). Screening
mobile application based on social ecological model with Pancasila in learning as an effort
to prevent radicalism in the digital age. Journal of Engineering Science and Technology,
(3), 97–104.
Nurhikmayati, I., Darhim, D., Dahlan, J. A., and Prabowanto, S. (2025). Enhancing critical
thinking in geometry with GeoGebra: A focus on cubes and cuboids. Journal of
Engineering Science and Technology, 20(3), 65–72.
Nurjamin, A., Nurjamin, L.R., Fajriah, Y.N., Nurjamin, A.K., and Nugraha, I. (2025). Developing
and evaluating an augmented reality (AR) digital storytelling video to foster multimodal
literacy and narrative comprehension. Journal of Engineering Science and Technology,
(4), 919–956.
Otamukhamedova, G.K., Ziyadullaev, O.E., Salieva, M., Boltayeva, R.A., Faizullaev, R.K.,
Sayfieva, Y.U.Q., Esanmurodova, N., and Omonova, M.D. (2025). Synthesis and
characterization of acetylene alcohols via alkynylation of heteroatomic aldehydes with
phenylacetylene under various reaction parameters completed with spatial chemical
structure, literature review, and bibliometric analysis. ASEAN Journal of Science and
Engineering, 5(1), 61-76.
Oualdi, I., Merzouki, M., Ouahhoud, S., Chakrone, K., Benabbes, R., Yousfi, E.B., Challioui, A.,
Hammouti, B., and Touzani, R. (2025). Essential oils of artemisia herba-alba, mentha
pulegium, and cedrus atlantica: Chemical compositions, in vitro, in vivo, in silico
antifungals activities, and genotoxicity. ASEAN Journal of Science and Engineering, 5(1),
-60.
Paksi, H. P., Akbar, S., Atok, A. R. A., Hosibuan, Z. A., and Penehafo, A. E. (2025). Development
of “self-reflection instrument for character detection (Serinteron)” to help students
know the strengths and weaknesses of their characters. Journal of Engineering Science
and Technology, 20(3), 153–160.
Payung, Z., Kusumah, Y. S., Mulyaning, E. C., and Avip, B. (2025). Enhancing elementary
students’ mathematical representation skills through VBA-based digital learning media
in Microsoft Excel. Journal of Engineering Science and Technology, 20(3), 137–144.
Philip Selvaraj, D., and Chandramohan, P. (2010). Optimization of surface roughness of AISI
austenitic stainless steel in dry turning operation using Taguchi design method.
Journal of Engineering Science and Technology, 5(3), 293–301.
Prasojo, L.D., Yuliana, L., and Prihandoko, L.A. (2025). Research performance in higher
education: A PLS-SEM analysis of research atmosphere, collaboration, funding,
competence, and output, especially for science and engineering facilities in Indonesian
universities. ASEAN Journal of Science and Engineering, 5(1), 123-144.
Pratiwi, E. Y. R., Susantini, E., Widodo, W., Dwinanto, A., and Suryanti, S. (2025). Digital
ecoliteracy learning model: Digital literacy innovations for elementary school students in
Indonesia. Journal of Engineering Science and Technology, 20(3), 129–136.
Purnomo, A. M., Monayo, N., Suherman, I., Sihotang, S., and Fanani, M. Z. (2025). Socialeconomic evaluation of dye processing from Indigofera tinctoria Linn in the Ammatoa
Kajang indigenous cultural community. Journal of Engineering Science and Technology,
(2), 206–213.
Ragadhita, R., and Nandiyanto, A. B. D. (2024). A bibliometric analysis of materials
engineering education: Trends and their implications for research and education. ASEAN
Journal of Educational Research and Technology, 3(3), 327-344.
Ragadhita, R., Fiandini, M., Al Husaeni, D.N., and Nandiyanto, A.B.D. (2026). Sustainable
development goals (SDGs) in engineering education: Definitions, research trends,
bibliometric insights, and strategic approaches. Indonesian Journal of Science and
Technology, 11(1), 1-26.
Ragadhita, R., Fiandini, M., Nandiyanto, A.B.D., Septiani, E.L., Ogi, T., and Okuyama, K. (2025).
Current strategies for mitigating airborne pathogen transmission: An integrative review
based on aerosol science and particle technology to support the Sustainable Development Goals (SDGs), complemented by a bibliometric analysis. ASEAN Journal of
Science and Engineering, 5(2), 261-314
Rahadi, M.D., Susanti, R., Wijayanti, Y., Maspiyah, M., Windayani, N.R., and Ibnu, F. (2025).
Digital educational media for hospital waste management: addressing waste types, illegal
disposal, and environmental impact. ASEAN Journal of Science and Engineering, 5(1),
-122.
Rahman, M.H.A., Mahmud, J., Jumaidin, R., and Rahman, S.M.A. (2025). Integrated CRITICTOPSIS and Monte Carlo sensitivity analysis for optimal various natural fibre selection in
sustainable building insulation composites to support the Sustainable Development
Goals (SDGs). ASEAN Journal of Science and Engineering, 5(2), 231-260
Rahmat, A., Zahrani, A., Hidayat, H., Arum, F., Respati, S.A., Susanti, W.D., Hariadi, H., and
Mutolib, A. (2025). Characteristics of jengkol peel (Pithecellobium jiringa) biochar
produced at various pyrolysis temperatures for enhanced agricultural waste
management and supporting sustainable development goals (SDGs). ASEAN Journal of
Science and Engineering, 5(1), 145-172.
Rasiban, L.M., Putu Gede Ismaya Triwikram, I., Sudjiati, N., and Sugihartono. (2025).
Integrating game-based learning and cognitive strategies in Kanji instruction: A case
study of 'Kanji Journey' RPG for Japanese JLPT N5 learners. Journal of Engineering Science
and Technology, 20(4), 990–1011.
Ruhana, F., Suwartiningsih, S., Mulyandari, E., Handoyo, S., and Afrilia, U. A. (2024).
Innovative strategies for achieving sustainable development goals amidst escalating
global environmental and social challenges. International Journal of Science and
Society, 6(1), 662-677.
Rusdjijati, R., Purnomo, B.C., Rochman, M.L., Pertiwi, F.D., and Setiyo, M. (2025). Integration
of water heating systems with car air conditioning systems: A bibliometric analysis, labscale investigation, and potential applications. Indonesian Journal of Science and
Technology, 10(1), 75-92.
Rusmana, N., Hafina, A., Irawan, T. B. M. I. A., Mulyati, S., and Mashudi, E. A. (2025).
Development and validation of an Android application to enhance life skills for junior
high school students. Journal of Engineering Science and Technology, 20(3), 185–192.
Saprudin, S., Lutfi, S., Hamid, E., Hayat, M. S., and Gumilar, S. (2025). Utilizing augmented
reality media in science laboratory activities: Enhancing students’ competence in
explaining phenomena scientifically. Journal of Engineering Science and Technology,
(3), 41–48.
Saputri, V., Kusumah, Y. S., Turmudi, T., and Jupri, A. (2025). Designing a STEM-RME-based
mathematics e-module to enhance high school students’ numeracy. Journal of
Engineering Science and Technology, 20(3), 177–184.
Sari, Y. R. W., Suryadi, K., Rahmat, R., and Nurbayani, S. (2025). Exploring food preferences
across generations: Insights from Appsheet data analysis. Journal of Engineering Science
and Technology, 20(3), 105–112.
Senthil Kumar, P., and Gayathri, R. (2009). Adsorption of Pb²⁺ ions from aqueous solutions
onto bael tree leaf powder: Isotherms, kinetics and thermodynamics study. Journal of
Engineering Science and Technology, 4(4), 381–399.
Sesrita, A., Adri, H.T., Suherman, I., Rasmitadila, R., and Fanani, M.Z. (2025). Production of
wet organic waste ecoenzymes as an alternative solution for environmental conservation
supporting sustainable development goals (SDGs): A techno-economic and bibliometric
analysis. ASEAN Journal for Science and Engineering in Materials, 4(2), 245-266.
Sirojuddin, S., Prabowati, R., Jaharudin, J., Hidayat, E. A., and Malawat, S. W. (2025).
Integration of ethnobotany and technology in e-module development for animal
structure courses. Journal of Engineering Science and Technology, 20(3), 145–152.
Soegoto, H.S., Pohan, M.A.R., Luckyardi, S., Supatmi, S., Amasawa, E., Phithakkitnukoon, S.,
and Hasibuan, Z.A. (2025). Contributing factors to greenhouse gas emissions in
agriculture for supporting sustainable development goals (SDGs): Insights from a
systematic literature review completed by computational bibliometric analysis. ASEAN
Journal of Science and Engineering, 5(2), 199-230.
Solehuddin, M., Nandiyanto, A. B. D., Muktiarni, M., Rogadhita, R., and Fiandini, M. (2025).
Engineering research and scientific contributions at Universitas Pendidikan Indonesia:
Trends, challenges, and future directions. Journal of Engineering Science and Technology,
(3), 816–836.
Susilawati, A., Al-Obaidi, A.S.M., Abduh, A., Irwansyah, F.S., and Nandiyanto, A.B.D. (2025).
How to do research methodology: From literature review, bibliometric, step-by-step
research stages, to practical examples in science and engineering education. Indonesian
Journal of Science and Technology, 10(1), 1-40.
Umam, R., Junaidi, R., Syazali, M., Farid, F., Saregar, A., Andiyan, A., and Takahashi, H. (2025).
Optimization of piper trilinier diagram using lithium isotope systematics: An application
for detecting the contribution of geothermal water from Aso Caldera after earthquake
in Kumamoto aquifer, Japan. Indonesian Journal of Science and Technology, 10(1),
-170.
Usman, F., Murakami, K., Wijatmiko, I., Rokman, M., and Nabila, M.A. (2025). Role of coastal
vegetation belts in mitigating tsunami waves: Bibliometric analysis, numerical, and
spatial analysis. ASEAN Journal of Science and Engineering, 5(1), 31-44.
Vanegas, E., Luna-DelRisco, M., Rocha-Meneses, L., Arrieta, C.E., Sierra, J., and Yepes, H.A.
(2025). Chemical looping systems for hydrogen production and their implementation in
Aspen Plus software: A review and bibliometric analysis. Indonesian Journal of Science
and Technology, 10(2), 249-284.
Waardhani, A.W., Noviyanti, A.R., Kusrini, E., Nugrahaningtyas, K.D., Prasetyo, A.B., Usman,
A., Irwansyah, F.S., and Juliandri, J. (2025). A study on sustainable eggshell-derived
hydroxyapatite/CMC membranes: Enhancing flexibility and thermal stability for
sustainable development goals (SDGs). Indonesian Journal of Science and Technology,
(2), 191-206.
Wahyuni, N., Usman, T., Ramadhan, M.I., and Astar, I. (2025). H2O2-modified geopolymers
as integrated adsorbent-catalysts for FFA removal and biodiesel production from crude
palm oil. Indonesian Journal of Science and Technology, 10(1), 113-132.
Wicaksono, V. D., Murtadho, N., Arifin, I., Soegoto, E. S., & Penehafo, A. E. (2025).
Development of web platform: A digital solution for school bullying prevention and
intervention. Journal of Engineering Science and Technology, 20(3), 113–120.
Wiratomo, G. H., Komalasari, K., Rahmat, R., Masyitoh, I. S., and Nugraheni, E. P. (2025).
Design of Appsheet civic dispositions survey (CDS) to understand characters Gen Z
students. Journal of Engineering Science and Technology, 20(3), 9–16.
Xing, G., Chano, J., Thadanatthaphak, Y., and Wu, C.C. (2025). Physical adaptation of college
students in high-altitude training: Empirical findings and curriculum development
insights to support Sustainable Development Goals (SDGs). ASEAN Journal of Educational
Research and Technology, 4(2), 215-236.
